176
11.8 Simulator
We recommend that you use the simulator to familiarize yourself with the AIS function.
When the system simulator is switched on (see
within a 25nm range. These targets are displayed using the appropriate AIS targets
status symbol (see
Important: Incoming safety messages cannot be displayed while the simulator is
switched on.
11.9 AIS Layer Setup Menu
The AIS Layer Setup Menu allows you to:
• Select the target types displayed (ALL or DANGEROUS).
• Switch the dangerous and lost target alarm warning ON/OFF.
• Switch the display of AIS safety messages ON/OFF.
• View the list of active AIS unit alarms.
To display the AIS Layer Setup Menu:
1. Set the AIS LAYER status to ON ((see
2. Select the AIS Layer Setup:
page 170
) and move around the screen as if they were real targets.
Chart Setup...
Cartography Setup...
MENU
GPS Status...
Compass Setup...
AIS Layer Setup
C-Series Display Reference Manual
page 184
page 169
).
Setup
Highlight AIS
Layer Setup
Select AIS
LayerSetup
), it displays 20 AIS targets
AIS Layer Setup
Displayed Target Types
All
AIS Alarms List...
Highlight required
option
Select option
Set/view as required