Wiring And Connecting A Profinet Connector - Siemens SIDOOR ATD401W System Manual

4.5.4.2

Wiring and connecting a PROFINET connector

Requirement
Note
Use an Industrial Ethernet cable with a maximum length of 100 m to connect RJ45
connectors.
Wiring
The PROFINET module provides two PROFINET ports:
● Port 1: Signals are connected crossed. The assignments correspond to switch
assignments (MDI-X)
● Port 2: signals are connected on a 1:1 basis. The assignments correspond to the default
assignments for terminal devices (MDI) 1.
The RJ45 sockets used do not contain any integrated transmitters or LEDs for signaling.
Table 4- 19
Pin
1
2
3
4
5
6
7
8
ATD4xxW Door Controller for Industrial Applications
System Manual, 01/2017, A5E38080677-AB
X1000 assignments (Port 1/Port 2)
Signal name Type
TXP O
TXN O
RXP I
TERM
TERM
RXN I
TERM
TERM
Description
Ethernet transmit differential signal
Ethernet transmit differential signal
Ethernet receive differential signal
Termination
Termination
Ethernet receive differential signal
Termination
Termination
Controllers
4.5 Relay and fieldbus interfaces
141