Table of Contents
Advertisement
Properties of the SINAUT components
1.3 Properties of the TIM modules
1.3.4.7
Standard connecting cables that can be connected to connector X1
An external modem or other transmission device can be connected to the 9-pin X1 connector
of the combined RS-232/RS-485 interface.
To connect to connector X1, the following standard connecting cables are available.
Table 1- 15
Connectable standard cables for all TIM 4 modules
Order no.
Description
6NH7701-4AL
Cable for connecting the TIM 3V-IE (RS-232) to one of the
SINAUT ST7 modems MD2, MD3 or MD4 (RS-232).
Also suitable for linking these modems to a SIMATIC point-
to-point CP such as the CP 340, CP 341 or CP 441 with
RS-232 interface.
Cable length 1.5 m
6NH7701-4DL
Cable for connecting a TIM 4R-IE / TIM 4 (RS-485) with
multiple SINAUT ST7 dedicated line modems connected in
parallel of the type MD2 or MD3 (RS-485).
Cable length 1.5 m
6NH7701-5AN
Cable for connecting the TIM (RS-232) to the GSM modem
MD720-3 (RS-232). Also suitable for third-party modems or
wireless devices with RS-232 standard.
Cable length 2.5 m.
48
Illustration
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10
Advertisement
Table of Contents
