YASKAWA A1000 Quick Start Manual page 11

2 Mechanical Installation

Unpacking the Unit
1. Remove screws from the front of the crate, then remove the front door.
2. Remove screws from the rear of the crate, then slide the crate off the bottom pallet.
3. Remove the cardboard edging strips.
4. Use scissors carefully to remove the cellophane. Make sure not to damage the paintwork.
Depending on local conditions either follow the crane lifting instructions or the forklift lifting instructions.

Crane Lifting Instructions
1. Remove crews on both sides of the unit and remove the side panels. The screws will be needed in step 3.
2. Remove M10 bolts on both sides of the unit and remove all washers.
3. Attach both side panels back to the unit with the screws.
4. Attach the crane to the M12 eyebolts of the unit. Carefully lift the unit off the pallet.
YASKAWA Europe TOEP C710616 88A - AC Drive A1000 IP23/54 Floor Standing - Quick Start Guide EN 11