Edacs Trunking Setup - Radio Shack Pro-164 Manual

6.. If.necessary,.use.the.number.keys.to.enter.a.
new.Offset.frequency.and.press.ENT..The.S.
in.Step.blinks.
If you try to program an offset frequency
in the UHF-Hi bands (806-960 MHz), the
scanner ignores the entry.
7.. While.the.S.in.Step.blinks,.repeatedly.press.
.or..to.select.the.step.number:.5.0,.
6.25,.10.0,.12.5,.15.0,.18.75,.20.0,.25.0,.30.0,.
31.25,.35.0,.37.5,.40.0,.43.75,.or.50.0.kHz,.
then.press.ENT.
8
.. Press.PGM.
UHF-Hi (806-960 MHz)
To program 800 MHz Motorola trunking:
1.. Press.PGM.then.TRUNK.to.enter.the.ID.
program.mode.
2.. Press.FUNC,.then.press..or...The.bank.
number.increases.or.decreases.by.one..If.
you.hold.down..or.,.the.bank.number.
increases.or.decreases.continuously.
3.. If.necessary,.repeatedly.press.MODE.to.
select."Motorola."
4.. Press.FUNC.then.3..NORMAL.appears.
5.. Press..or..to.select.NORMAL.or.
SPLINTER.and.press.ENT..If.you.are.
uncertain.about.the.base.frequency,.use.
NORMAL..
.
The.base.frequency.in.NORMAL.is.851.0125.
MHz..The.base.frequency.in.SPLINTER.is.
851.0000.MHz....If.you.cannot.receive.with.
the.NORMAL.setting,.change.to.SPLINTER..

EDACS Trunking Setup

EDACS.(GE/Ericsson).systems.transmit.Talk.

Group.ID.data.on
Scanning.require
control.channel.a
generally.have.a.
can.manually.sele
external.antenna.
scanning..If.you.a
for.an.EDACS.sys
in.the.Logical.Cha
listed.as.LCN#).
LTR Trunkin
LTR.systems,.ass
Repeater.(HR).nu
programmed.with
radio..LTR.Talk.Gr
specific order, an
the.frequencies.in
used.primarily.by
delivery.trucks,.a
LTR.systems.use.
their.Talk.Group.I
To save a correct
1.. Save.the.LTR.
2.. Set.the.bank.
3.. Manually.sele
LTR.data.on.t
. Your.scanner
ID.and.a.num
number.is.the
the.transmiss
4.. The.assigned
equal.the.Hom
example,.R12
Channel.12.