Lucent Technologies 2300EU System Administrator Manual page 78

Dial Line
D
A telephone line that is part of the Public Switched
Telephone Network and is accessed through the
DEFINITY
Direct Line
Directory Number
DTE speed
DTR – Data Terminal Ready
EU – Europe
E
ETI – Enhanced Terminal Interface
Facility
F
70
®
Extender's automatic dial-up function.
A dedicated circuit or private leased line.
A Directory Number (DN) is the number programmed
into the Switch and Remote Modules used to dial the
modules and any equipment connected to them. There
are two Directory Numbers for each module, one to
dial the module and one to dial the PC, server, or fax
machine, analog modem, or analog telephone
connected to the module.
The speed at which the COM1 serial port runs.
A control signal sent from the DTE to the DCE that
indicates that the DTE is powered on and ready to
communicate. DTR can also be used for hardware
flow control.
Identifies this product as a European product.
Transmission facilities. Usually a metallic pair of
wires, but can be telephone company carriers, T-1,
microwave or dial-up telecommunications lines.
ISDN DEFINITY® Extender 2300EU/2100EU