Verify Upgrade - Lucent Technologies 2300EU System Administrator Manual

Software Upgrading
6.
Upgrading by
the Serial
Port
cont'd
Once downloaded, the new code release is verified by
Verifing
checking the new code's CRC (Cyclical Redundancy
Upgrade
Check). The module then displays:
If the test passed, the terminal will show:
Your module is still running the old code until you restart
the Module, press the return key to automatically restart
your module and to begin executing the new software.
44
You will have 60 seconds to select the ASCII, or text
file, upload protocol and select the S-record file to
upload to the module. The module will then display
the following message:
Starting upload, have received and written up to
line...
100
200
The line count continues in increments of 100 lines.
The total number of lines ranges from 9000 to 14000
lines. The process can take 10 or more minutes,
depending on the size of the file. When completed,
the display will show the following message:
The file was captured and stored to flash with no
errors.
Verifying new code...
Code Verified. Upgrade Successful!
Press Return Key to Restart Unit.
ISDN DEFINITY® Extender 2300EU/2100EU