Fatal Errors - Lucent Technologies 2300EU System Administrator Manual

If a fatal error occurred during the previous operation

Fatal Errors

cycle (the last time the Extender was powered up), the
Remote phone will display The Last Error Was, followed
by a message.
Unknown Error Unknown fatal error occurred on previous power up
Message Description
If the DSP is not operating correctly, contact Customer Support.
No DSP
Response
The Digital port at the Remote Module was disconnected during
Port
normal operation.
Disconnected
If it continues to be displayed, then possible hardware problem.
No SCC
Contact Customer Support.
Transmit
Table 11 The fatal error messages and descriptions.
ISDN DEFINITY® Extender 2300EU/2100EU
Fatal Error Messages
65