Terminal Adapter Configuration Commands - Lucent Technologies 2300EU System Administrator Manual

2100EU AT Command Set
Command Description
@P2= DTE speed - the speed at which the
COM1 serial port is to run
@P3= Parity
@P4= Number of data bits
@P6= Number of stop bits
Table 2. COM1 Port Configuration Commands
Command Description
En Local echo
Qn Status messages - are AT command
responses and connection progress
messages displayed
Vn Message format
Wn Carrier/Protocol result codes - are
carrier and protocol messages
displayed
Table 3. Terminal Adapter Configuration Commands
36
Values
2400, 4800, 9600,
115.2 19200, 38400,
57600<default>
N - none <default>
O – odd
E – even
7 or 8 <default>
0 - 1 stop bit <default>
2 - two stop bits
Values
n=0- Disabled
n=0- Enabled <default>
n=0- Numeric messages
n=0- Disabled<default>
Continued on the next page...
ISDN DEFINITY® Extender 2300EU/2100EU
1- Enabled<default>
1- Disabled
1- Verbose messages
<default>
1- Enabled