Terminal Adapter Action Commands; At Result Codes - Lucent Technologies 2300EU System Administrator Manual

2100EU AT Command Set
Terminal Adapter Configuration Commands
Command Description
&Fn Load active port profile with
factory default profile n.
&Wn Writes the active port profile (into
non-volatile memory) to stored
profile n.
Zn Reloads active profile from stored
profile n.
Table 3. Terminal Adapter Configuration Commands Cont'd

Terminal Adapter Action Commands

Command Description
A Answer an incoming call
D Initiate an ISDN call
H Hang-up a call
O Return back to online mode
from AT command mode
Table 4. Terminal Adapter Action Commands
The following codes may be returned after an AT
AT Result
command is executed. Depending upon the value of the
Codes
message format configuration parameter, either the
numeric or verbose message will be displayed.
settings of the Carrier/Protocol Result Codes and the
Connect Messages parameters may also keep some of the
messages from being displayed.
ISDN DEFINITY® Extender 2300EU/2100EU
cont'd
Values
n = 0 or blank0
n = 0
n = 0 or blank
Values
'0'-'9', '(', ')', '-', ';', ','
For backwards compatibility the
D may be followed by P, T, or
W
Continued on the next page...
The
39