Setting Parity; Setting Data Bits; Setting Stop Bits - Lucent Technologies 2300EU System Administrator Manual

2100EU TA Configuration
To set the Parity:

Setting Parity

1.
2.
When you make your selection, the Data Bits menu will
appear.
To change the Data Bit setting:
Setting Data
Bits
1.
2.
When you make your selection, the Stop Bits menu will
appear.
To change Stop Bits:
Setting Stop
Bits
1.
2.
You will now automatically return to the Configure
System Menu.
ISDN DEFINITY® Extender 2300EU/2100EU
Highlight the parity you want. Your choices are None
(recommended), Even or Odd.
Press Enter.
Highlight the desired Data Bit. Your two options are
8 (recommended) or 7 data bits.
Press Enter.
Highlight the Stop Bit format you want. Your options
are 1 (recommended) or 2 stop bits.
Press Enter.
33