Lucent Technologies 2300EU System Administrator Manual page 54

Software Upgrading
The LCD will request confirmation that you want to
upgrade your Switch Module by prompting Are You
Sure?
1.
1a.
The LCD will display Starting, PBX Upgrade, followed
by Erasing Flash at PBX, and, finally, the upgrade status.
The percentage value will increase as the upgrade
proceeds, and depending on the size of code release, will
take a couple of minutes. The new software is being
stored to the FLASH memory on your Switch Module.
When the upgrade is 100% completed, the new code is
downloaded.
46
Press OK or 2 to start.
OR
Press No or 3 to abort.
0% Completed
ISDN DEFINITY® Extender 2300EU/2100EU