Lucent Technologies 2300EU System Administrator Manual page 51

Software Upgrading
2.
Upgrading
By The Serial
Port
cont'd
3.
4.
5.
Please wait while flash memory is being erased...
The erase process takes about 15 seconds. The message
Erasing Flash Memory is displayed as Flash ROM is
being prepared to receive the new code. The module
should then display:
The screen should display the following message:
ISDN DEFINITY® Extender 2300EU/2100EU
During the yellow flash sequence, type MENU
during the yellow sequence. After you type MENU,
the configuration Main Menu will appear on the
terminal screen.
From the Main Menu, select the Configure System
menu option.
From the System Menu, select Software Upgrade.
The command will initiate the upgrade process.
The module will display the following messages:
Last chance to stop... The Flash memory will be
erased.
Do you want to continue?
Enter Y to continue, any other key to abort.
Enter Y to continue. The following message will be
displayed:
Successfully erased
Please upload (to module) the S Record file using
ASCII protocol.
Waiting for upload file...
Continued on the next page...
43