Table of Contents
Advertisement
Software Upgrading
Your Switch Module will now verify if the new code
Verifying the
release was downloaded successfully.
Switch
The remote phone should display:
Upgrade
This process may take from 12 to 15 seconds depending
on the code size. Your remote phone will display:
The remote phone will prompt you with the question
Restart Units?
loaded into your Switch Module's FLASH memory, your
Switch Module is still running your old code.
Press Ok or 2 to invoke a disconnection from the Switch
Module and restart your Switch Module with the newly
downloaded code.
If you encounter any errors during the Upgrade process,
please see Cannot Upgrade Software section.
ISDN DEFINITY® Extender 2300EU/2100EU
Verifying Upgrade
Upgrade Successful!
Even though the new code has been
47
Advertisement
Table of Contents
