Table of Contents
Advertisement
Configuring Using a Terminal
The first DN should be paired with SPID1. Follow these
Setting DN1
steps to set the first Directory Number:
You automatically return to the Configure ISDN Menu.
To save your changes if you are finished programming,
Exit from the Configure ISDN Menu. Type "Y" at the
system prompt to save your changes. Type "N" at the
system prompt to discard your changes.
ISDN DEFINITY® Extender 2300EU/2100EU
1. Select 1 for "Configure ISDN" from the Main
Menu on the terminal emulation program to reach
the ISDN parameter menu.
2. Select 4 for "Set DN1" from the Configure ISDN
menu.
If a previous DS1 number was stored, the display
shows that number. If no DN! number was stored, the
display is blank.
3. Enter the first DN for the Switch Module, up to
15 digits in length.
4. Press Enter to accept the change.
19
Advertisement
Table of Contents
