Lucent Technologies 2300EU System Administrator Manual page 29

Configuring Using a Terminal
The Terminal Endpoint Identifier (TEI) provides
Setting The
identification of the communication device to the Central
TEI Type
Office (CO).
We recommend that you leave the TEI setting on Auto if
your service provider has not provided you with a fixed
TEI value. If a fixed TEI is provided, select Fixed TEI
type.
From the ISDN Configuration menu:
1.
2.
3.
If you select FIXED TEI, press SET TEI1.
If you selected FIXED TEI type:
1.
2.
3.
If you change a FIXED TEI type, you must power-down
your module to use the new ISDN settings.
ISDN DEFINITY® Extender 2300EU/2100EU
Press 6 to set TEI Type.
Toggle between FIXED and AUTO.
Press Exit to save the selection.
Press 7 to Set TEI1.
Enter the TEI number of the switch site (0-63).
Press Return to save the number.
21