Vrf Policy Deny - Cisco Nexus 5500 Series Command Reference Manual

vrf policy deny

vrf policy deny
To configure the deny access to a virtual forwarding and routing instance (VRF) policy for a user role,
use the vrf policy deny command. To revert to the default VRF policy configuration for a user role, use
the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes User role configuration mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to enter VRF policy configuration mode for a user role:
switch(config)# role name MyRole
switch(config-role)# vrf policy deny
switch(config-role-vrf)#
This example shows how to revert to the default VRF policy for a user role:
switch(config)# role name MyRole
switch(config-role)# no vrf policy deny
Related Commands Command
role name
show role
Cisco Nexus 5500 Series NX-OS Security Command Reference
362
vrf policy deny
no vrf policy deny
Modification
This command was introduced.
Description
Creates or specifies a user role and enters user role configuration mode.
Displays user role information.
Chapter V Commands
OL-27883-02