Show Ip Dhcp Snooping Statistics - Cisco Nexus 5500 Series Command Reference Manual

show ip dhcp snooping statistics

show ip dhcp snooping statistics
To display Dynamic Host Configuration Protocol (DHCP) snooping statistics, use the show ip dhcp
snooping statistics command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History Release
5.2(1)N2(1)
Examples
This example shows how to display DHCP snooping statistics:
switch# show ip dhcp snooping statistics
Packets processed 61343
Packets received through cfsoe 0
Packets forwarded 0
Packets forwarded on cfsoe 0
Total packets dropped 61343
Packets dropped from untrusted ports 0
Packets dropped due to MAC address check failure 0
Packets dropped due to Option 82 insertion failure 0
Packets dropped due to o/p intf unknown 0
Packets dropped which were unknown 0
Packets dropped due to dhcp relay not enabled 0
Packets dropped due to no binding entry 0
Packets dropped due to interface error/no interface 61343
Packets dropped due to max hops exceeded 0
switch#
Related Commands Command
copy running-config
startup-config
ip dhcp snooping
show running-config
dhcp
Cisco Nexus 5500 Series NX-OS Security Command Reference
292
show ip dhcp snooping statistics
Modification
This command was introduced.
Description
Copies the running configuration to the startup configuration.
Globally enables DHCP snooping on the device.
Displays the DHCP snooping configuration.
Chapter Show Commands
OL-27883-02