Show Startup-Config Aclmgr - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show startup-config aclmgr

To display the access control list (ACL) configuration in the startup configuration, use the show
startup-config aclmgr command.
Syntax Description all
Command Default
None
Command Modes Any command mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to display the ACL startup configuration:
switch# show startup-config aclmgr
!Command: show startup-config aclmgr
!Time: Tue Aug 31 05:01:58 2010
version 5.2(1)N1(1)
ip access-list BulkData
10 deny ip any any
ip access-list CriticalData
10 deny ip any any
ip access-list Scavenger
10 deny ip any any
mac access-list acl-mac
10 permit any any
ip access-list denyv4
20 deny ip 10.10.10.0/24 10.20.10.0/24 fragments
30 permit udp 10.10.10.0/24 10.20.10.0/24 lt 400
40 permit icmp any any router-advertisement
60 deny tcp 10.10.10.0/24 10.20.10.0/24 syn
70 permit igmp any any host-report
80 deny tcp any any rst
90 deny tcp any any ack
100 permit tcp any any fin
110 permit tcp any gt 300 any lt 400
130 deny tcp any range 200 300 any lt 600
140 deny tcp any range 200 300 any lt 600
:
<snip>
:
vlan access-map vacl-mac
match mac address acl-mac
action forward
OL-27883-02
show startup-config aclmgr [all]
(Optional) Displays configured and default information.
Modification
This command was introduced.
Cisco Nexus 5500 Series NX-OS Security Command Reference
show startup-config aclmgr
325