Show Checkpoint - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show checkpoint

To display the configuration at the time a checkpoint was implemented, use the show checkpoint
command.
Syntax Description checkpoint-name
all
system
user
Command Default None
Command Modes
EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines The command output displays a history of the most recent (up to ten) checkpoint IDs. The checkpoint
IDs represent the rollback points that allow the user to restore the system to a checkpoint configuration.
Examples This example shows how to display the rollback checkpoints configured in the local switch:
switch# show checkpoint
--------------------------------------------------------------------------------
Name: chkpnt-1
!Command: Checkpoint cmd vdc 1
!Time: Mon Sep
version 5.2(1)N1(1)
feature telnet
feature tacacs+
cfs eth distribute
feature private-vlan
feature udld
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature fex
username adminbackup password 5 !
username admin password 5 $1$KIPRDtFF$7eUMjCAd7Nkhktzebsg5/0
OL-27883-02
show checkpoint [checkpoint-name] [all [system | user]]
(Optional) Checkpoint name. The name can be a maximum of 32 characters.
(Optional) Displays user-configured and system-configured checkpoints.
(Optional) Displays all system-configured checkpoints.
(Optional) Displays all user-configured checkpoints.
Modification
This command was introduced.
6 09:40:47 2010
role network-operator
Cisco Nexus 5500 Series NX-OS Security Command Reference
show checkpoint
role network-admin
259