Cisco Nexus 5500 Series Command Reference Manual page 328

show running-config aclmgr
:
vlan access-map vacl-mac
match mac address acl-mac
action forward
statistics per-entry
vlan filter vacl-mac vlan-list 300
interface Ethernet1/1
ipv6 port traffic-filter denv6 in
interface Ethernet1/2
ip port access-group voice in
interface Ethernet1/9
ipv6 port traffic-filter denv6 in
interface Ethernet1/10
ipv6 port traffic-filter denv6 in
line vty
access-class myACList in
access-class myACList out
ipv6 access-class myI6List out
switch#
This example shows how to display only the VTY running configuration:
switch# show running-config aclmgr | begin vty
line vty
access-class myACList in
access-class myACList out
ipv6 access-class myI6List out
switch#
Related Commands Command
access-class
copy running-config
startup-config
ip access-class
ipv6 access-class
show startup-config
aclmgr
Cisco Nexus 5500 Series NX-OS Security Command Reference
314
Description
Configures access classes for VTY.
Copies the running configuration to the startup configuration file.
Configures IPv4 access classes for VTY.
Configures IPv6 access classes for VTY.
Displays the ACL startup configuration.
Chapter Show Commands
OL-27883-02