Styles - Graco PCF Instructions - Parts Manual

Operation

Styles

The PCF system has the ability to handle up to 255
styles, depending on the selected option. Styles typically
correspond to different components of a specific sys-
tem.
NOTE: The number of available styles depends on
the system configuration. See Models on page 4.
Style 0 is specified for purging only.
For each style, an independent target volume and toler-
ance can be configured. This allows for job-related
faults and logs to be evaluated for each style. The style
is read at the beginning of a job and cannot be changed
until the next job has been initiated.
To setup a style:
1. Press to access the style setup fields.
F . 27
IG
38
2. Enter the style number in the Style field.
a. Press while in the Style Name field to
enter the Keyboard screen.
F . 28
IG
b. Use the arrow buttons on the ADM to scroll
through each letter. Press to enter a letter in the
style name field. See Keyboard Screen, page
94, for further details.
c. Press to accept the new value.
3. Enter the target volume in the Volume field, and the
tolerance percentage in the Tolerance field.
4. Enter precharge mode and parameters. See Pre-
charge Modes on page 39.
5. Press to exit edit mode.
313377L