Models - Graco PCF Instructions - Parts Manual

Models

Models
Check the identification (ID) plate for the 6-digit part number of the fluid metering system. Use the following matrix to
define the construction of the system, based on the six digits. For example, Part PF1110 represents a PCF fluid
metering system (PF), a two style system (1), a fluid plate with a cartridge regulator and no meter (1), a DeviceNet
user interface (1) with a 100-240 Vac power supply (0).
NOTE: To order replacement parts, see Parts section in this manual. The digits in the matrix do not corre-
spond to the Ref. Nos. in the Parts drawings and lists.
PF
Third Digit
First and
Second Digits
Style/Size
Description
1
2
3
PF
(Precision
Continuous
Flow)
 Discrete Gateway systems do not include automation interface cables. The following Graco accessories are avail-
able for wiring to the automation system. Installers should follow Appendix B - Discrete Gateway Module
(DGM) Connection Details, page 98, for custom wiring.
50 ft (15 m) cable with flying leads (123793)
Breakout board (123783) and 50 ft (15 m) cable (123792)
Fluid metering systems with ETL certification and Canadian approval.

NOTE: Fluid metering systems with heated mastic regulators are not ETL certified.
9902471
Certified to CAN/CSA C22.2 No. 61010-1
Conforms to
UL 61010-1
This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, second edition, including Amend-
ment 1, or a later version of the same standard incorporating the same level of testing requirements.
4
1
Regulator
2 Styles 1 Cartridge
16 Styles 2
Mastic
256 Styles 3 Cartridge
4
Mastic
5 Heated
Mastic
6 Heated
Mastic
1
1
Fourth Digit
Fluid Plate
Meter
None 0
None 1
High 2
Resolution
High 3
Resolution
Heated 4
Standard
Resolution
None
1
Fifth Digit
User Interface
Description
0
Discrete
1
™
DeviceNet
™
EtherNet/IP
™
PROFIBUS
™
PROFINET
™
0
Sixth Digit
Voltage
Description
100 - 240 Vac
24 Vdc
313377L