Schedule - Q-See QC40198 User Manual

MAIN MENU
Note:
If the 1-channel resolution is D1and the frame rate is more than 6f/s, then the other seven channels (the second
channel to the eighth channel) resolution shall be CIF or QCIF.
If the 1-channel resolution is D1 and the frame rate is or less than 6f/s, then the other seven channels (the second
channel to the eighth channel) resolution shall be D1/CIF/QCIF. Right now in D1 resolution, the max frame rate is
6f/s on more then one channel.

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality.

Video/audio: You can enable or disable the video/audio.

Overlay: Click overlay button, you can see the interface shown in Figure 5-7

Cover area (Privacy mask): Here you can set privacy mask sections. You can drag your mouse to set section
size. In one channel video, system supports up to 4 zones.

Preview/monitor: privacy mask has two types. Preview and Monitor. Preview means the privacy mask zone can
not be viewed by user when system is in preview status. Monitor means the privacy mask zone can not be
viewed by the user when system is in monitor status.

Time display: You can select for the system to display time or not when you playback. Click set button and then
drag the title to the corresponding position in the screen.

Channel display: You can select whether system displays channel number or not when you playback. Click set
button and then drag the title to the corresponding position in the screen.

5.3.3 Schedule

Please refer to chapter 4.4 schedule.
Figure 5-7
50 | P a g e
QC40198 User Manual