Calendar; Schedule; Schedule Menu - Q-See QC40198 User Manual

NAVIGATION AND CONTROLS
4.3.2.7 Reverse Playback and Frame by Frame Playback
Button
Reverse play:
 in playback
interface.
Manual playback
frame by frame.

4.3.3 Calendar

Click the calendar icon
that there are recorded files on that day. You can click on the dates highlighted in blue (see Figure 4-11) to
view file list. In Figure 4-11 there are video files on June 13
file list.
4.4

Schedule

After the system boots up, it is in default 24-hour regular mode. You can set record type and time in the
schedule interface.
4.4.1

Schedule Menu

From the main menu, you can click the schedule option to get to the schedule menu illustrated in Figure 4-12
Channel: Please select the channel number first. You can select "all" if you want to set the same schedule

for all of the channels.

Week day: There are eight options: from Saturday to Sunday and all.

Pre-record: System can pre-record the video before the event occurs into the file. The value ranges from 1
to 30 seconds depending on the bit stream.

Redundancy: Please note redundancy function does not apply to current series since there is only one
hard drive.

Snapshot: You can enable this function to take a snap shoot of image when alarm occurs.

Record types: There are three types: regular, motion detection (MD) and Alarm.
Illustration
In normal playback mode, left click reverse play

button , system begins reverse playback.
Double click reverse play button again, system
goes to pause mode.
Click pause button in normal playback mode, you
│ and │
can use to view frame by frame.
illustrated in Figure 4-10 to generate a pop-up calendar. Highlighted dates indicate
29 |
th
and June 14
Figure 4-11
P a g e
QC40198 User Manual
Remarks
When system is in
reverse play or frame
by frame playback
mode, you can click
►

play button to go
/
to normal playback.
th
. Double click the date to view its