General - Q-See QC40198 User Manual

MAIN MENU

5.3.1 General

General setting includes the following items. See Figure 5-3.

System time: Here is where you set system time

Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: There are three options to separate date: dot, beeline and solidus.

DST: Here you can set DST time and date. Enable DST function and then click set button. You will see an
interface shown in Figure 5-4.
Here you can set start time and end time by setting corresponding week setup. In Figure 5-4, enable date button,
you can see the interface shown in Figure 5-5. Here you can set start time and end time by setting corresponding
date setup.

Time format: There are two types: 24-hour mode or 12-hour mode.
Figure 5-3
Figure 5-4
Figure 5-5
48 | P a g e
QC40198 User Manual