Q-See QC40198 User Manual page 3

SAFETY INSTRUCTIONS
1. Electrical Safety
All installation and operation should conform to your local electrical safety codes.
We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation.
2. Transportation Security
Avoid heavy stress, violent vibrations or contact with water during transportation, storage and installation of this
system.
3. Installation
Keep upright. Handle with care.
Do not provide power to the combo DVR prior to completing installation.
Do not place objects on the combo DVR.
4. Qualified Service Technicians
Any examination and repair work should be done only be a qualified service engineer.
We are not liable for any problems caused by unauthorized modifications or attempted repairs.
5. Environment
This product works in a temperature range of 32°F to 104°F (0°C -40°C).
This combo DVR should be installed in a cool, dry place away from direct sunlight and flammable or explosive
substances, etc.
6. Accessories
Make sure to only use accessories recommended by Q-See.
Before installation, check the package to verify that all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. About the LCD Screen
During installation, do not push or squeeze the LCD or its rim as this may result in LCD damage.
During operation or storage be careful to avoid contact between hard objects and the LCD screen.
Keep the LCD screen clean by using a soft cloth to remove any dirt or smudges regularly. Never use ether-based
chemicals, alcohol or other chemical agents to clean your screen.
CAUTION!
RISK OF ELECTRICAL SHOCK!
QC40198 User Manual