Q-See QC40198 User Manual page 104

WEB OPERATION
Function
PPPOE
Email
The email interface is shown in Figure 7-39.
Please refer to the following chart for detailed information.
Parameter
SMTP Server
Port
User Name
Password
Input the PPPoE user name and password you get from the

IPS (internet service provider) and enable PPPoE function.
Please save current setup and then reboot the device to
get the setup activated.
Device connects to the internet via PPPoE after reboot.

You can get the IP address in the WAN from the IP address
column.
 Please note if you want to reboot the device please make
sure you have proper reboot right and there is no user
logged in.
Figure 7-39
Function
Input server address and then enable this function.
Please input port value here.
The sender email account user name.
The sender email account password.
95 | P a g e
QC40198 User Manual