Video Quality; Record Schedule; Sensor Setup - Q-See QSD6209C9-250 User Manual

5.4 Video Quality

MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY

RECORD SCHEDULE

SENSOR SETUP

HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
RESET MENU
( ) MOVE
5.5 Record Schedule
RECORD SCHEDULE
AM
0 ... 3 ... 6 ... 9 ... 0 ... 3 ... 6 ... 9
（SEL）SELECT
( )MOVE
NO-RECORD: System will not record during this period.
NORMAL-RECORD: System will record continuously during this period.
SENSOR-RECORD: System will record when sensor is triggered.
[NOTE] You must press the "REC" button to record in these three modes.
5.6 Sensor Setup
[Note] Sensors and extension alarms do not come with the DVR system; you need to buy them separately.
SENSORED RECORD TIME and ALARM ON TIME are measured in seconds.
SENSORED SETUP
SENSORED RECORD TIME
ALARM ON TIME
H/W SENSOR SETUP
MOTION DETECTOR SETUP
（SEL）SELECT
( ) MOVE
NORMAL
（SEL）SELECT
(MENU)EXIT
PM
NO-RECORD
NORMAL-RECORD
s
SENSOR-SECORD
(MENU) EXIT
30
OFF
(MENU)EXIT
There are four video quality settings, Highest
\High\Normal\Low
The higher the video quality, the clearer the image will be
during playback. The lower the video quality, the more
space you will save on the hard drive
The video quality in view mode is not affected by the
video quality setting; these settings only affect the video
quality during playback of a recording.
The time line indicates the hours of the day based on an
AM/PM clock. For each hour, you may select between
NO-RECORD, NORMAL-RECORD, or
SENSOR-RECORD.
Press the "▲" and "▼" arrows to maneuver and use the
[SEL] button to change between continuous recording,
sensor recording and no recording. Once you have
finished, press [MENU] to exit.
SENSORED RECORD TIME: This indicates the length
of time the system records after a motion or sensor
triggered event ends. (Time: 5,10,15,20,25,30)
ALARM ON TIME: This selection indicates how many
seconds the buzzer inside the DVR or extension alarm
sounds after a motion or sensor triggered event ends.
CONT: Continuous alarm until any key is pressed.
OFF: No alarm
7