Q-See QC40198 User Manual page 129

MY Q-SEE DDNS
g. Enter the User Name, Password and Domain Name that you registered for through
see.com. Click the [APPLY] button at the bottom of the screen and then the [EXIT] button. This
should return you to the Network Setup menu.
h. Click the [APPLY] button and then the [EXIT] button at the bottom of the Network Setup Screen and
your DDNS setup is complete.

DDNS Type: You can select Q-SEE DDNS from the dropdown list.

Server IP: You can use ping command to get server's IP

Port: input server port here.

Domain Name: Get the domain name you get from your DDNS service provider.

User: Get the user name you get from your DDNS service provider.

Password: Enter corresponding password.
Highlight the icon in front of Enable to enable the DDNS server configuration.
Figure 8-4
Figure 8-5
120 | P a g e
QC40198 User Manual
http://myq-