Q-See QC40198 User Manual page 43

NAVIGATION AND CONTROLS

Period: Click set button (Figure 4-20), you can see the interface shown in Figure 4-23. Here you can set
for business day and non-business day as illustrated in Figure 4-24. Click set button to generate the
interface shown in Figure 4-24. Here you can set your own setup for business day and non-business day.

Anti-dither: Here you can set anti-dither time. This is the time you would want the system to delay before
starting recording on a motion alarm.

Alarm output: when an alarm occurs, system can upload alarm to the network (Including the alarm center.)

Tour: Here you can enable tour function when alarm occurs. It is a one-window tour. Please go to chapter
5.3.9 Display for tour interval setup.
Please highlight icon
button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video in each channel
may not be the same.
Figure 4-23
Figure 4-24
to select the corresponding function. After all the setups are complete click save
34 |
Figure 4-22
P a g e
QC40198 User Manual