Intelligent Positioning Key; Preset/ Patrol/Pattern/Scan - Q-See QC40198 User Manual

NAVIGATION AND CONTROLS
4.8.2.1

Intelligent Positioning Key

In the middle of the eight direction arrows, there is a 3D intelligent positioning key (see figure 4-38). This function
only works if your protocol supports it, and you need to use mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size.
The dragged zone supports 4X to 16X speeds. The function will work automatically. The smaller the zone you
dragged, the higher the speed.
Here is a chart for your reference:
Name Function
key
Zoom
Focus
Iris
4.9

Preset/ Patrol/Pattern/Scan

Click the "set" button illustrated in Figure 4-36. This will generate the interface shown in Figure 4-39.
Here you can set the following items:

Preset

Tour

Pattern

Border
Click the page switch button illustrated in Figure 4-36. This will activate the following functions:

Preset

Tour

Pattern

Auto scan

Auto pan

Flip

Reset

Page switch
Figure 4-38
function Shortcut
key
Near

│
Near

close
Figure 4-39
42 | P a g e
QC40198 User Manual
Function function
key
Far
Far
Open
Shortcut
Key

►
│
