Q-See QC40198 User Manual page 110

WEB OPERATION
Parameter Function
Email
Tour
PTZ
activation
Capture
Copy
Save
Refresh
Motion Detection
The detection interface is shown in Figure 7-46.
Put a checkmark to enable email function. System can send out email
to alert you when alarm occurs and ends.
Display the selected video in local monitor window.
Tour interval and tour mode are set in combo DVR local menu
(chapter 5.3.9 Display )
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The PTZ configuration events include preset, tour, and pattern.
You need to input capture channel number so that system can backup
snapshot file when alarm occurs.
This is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
You can click save button after you complete setup for one channel,
or you can complete the whole setup and then click save button.
Click this button to get device's latest configuration information.
Figure 7-46
101 | P a g e
QC40198 User Manual