Q-See QC40198 User Manual page 40

NAVIGATION AND CONTROLS
4.4.3.2 Activate Snapshot
Please follow the steps listed below to enable the activate snapshot function. After you have enabled this
function, the system can now take snapshots when corresponding alarm occurs.

In Encode interface, click snapshot button to input snapshot mode, size, quality and frequency (see Figure
4-16).

In General interface please input upload interval (see Figure 4-14).

In Detect interface please enable snapshot function for specified channels. Or in alarm interface please
enable snapshot function for channels you want.

Refer to Figures 4-16 Through 4-18 for a more detailed illustration.
Figure 4-16
Figure 4-15
Figure 4-18
31 | P a g e
QC40198 User Manual
Figure 4-17