Restoring Backup Data To Aquamap; Saving System Information To A Memory Card; Digital Selective Calling; Networked Aquamap And Vhf Radio Functionality - Garmin AQUAMAP 10x2 Series Owner's Manual

7 Copy the backup file on the card and paste it to any location on the
computer.

Restoring Backup Data to AQUAMAP

1 Insert a memory card into a card reader that is attached to the computer.
2 Copy a backup file from the computer to the memory card, into a folder
named Garmin\UserData.
3 Insert a memory card into the card slot.
4 Select NAV INFO > User Data > Data Transfer > Replace from Card.

Saving System Information to a Memory Card

You can save system information to a memory card as a troubleshooting
tool. A product support representative may ask you to use this information to
retrieve data about the network.
1 Insert a memory card into the card slot.
2 Select Settings > System > System Information > Garmin Devices >
Save to Card.
3 If necessary, select the memory card to save system information to.
4 Remove the memory card.

Digital Selective Calling

Networked AQUAMAP and VHF Radio Functionality

If you have a NMEA 0183 VHF radio or a NMEA 2000 VHF radio connected
to your AQUAMAP, these features are enabled.
• The AQUAMAP can transfer your GPS position to your radio. If your radio
is capable, GPS position information is transmitted with DSC calls.
• The AQUAMAP can receive digital selective calling (DSC) distress and
position information from the radio.
• The AQUAMAP can track the positions of vessels sending position reports.
66
If you have a Garmin NMEA 2000 VHF radio connected to your AQUAMAP,
these features are also enabled.
• The AQUAMAP allows you to quickly set up and send individual routine
call details to your Garmin VHF radio.
• When you initiate a man-overboard distress call from your radio, the
AQUAMAP shows the man-overboard screen and prompts you to navigate
to the man- overboard point.
• When you initiate a man-overboard distress call from your AQUAMAP, the
radio shows the Distress Call page to initiate a man-overboard distress
call.

Turning On DSC

Select Settings > Other Vessels > DSC.

DSC List

The DSC list is a log of the most recent DSC calls and other DSC contacts
you have entered. The DSC list can contain up to 100 entries. The DSC list
shows the most recent call from a boat. If a second call is received from the
same boat, it replaces the first call in the call list.
Viewing the DSC List
Before you can view the DSC list, the AQUAMAP must be connected to a
VHF radio that supports DSC.
Select NAV INFO > DSC List.
Adding a DSC Contact
You can add a vessel to your DSC list. You can make calls to a DSC contact
from the AQUAMAP.
1 Select NAV INFO > DSC List > Add Contact.
2 Enter the Maritime Mobile Service Identity (MMSI) of the vessel.
3 Enter the name of the vessel.
AQUAMAP™ 10x2/12x2 SERIES