Creating And Saving A Route; Viewing A List Of Routes And Auto Guidance Paths; Editing A Saved Route; Browsing For And Navigating A Saved Route - Garmin AQUAMAP 10x2 Series Owner's Manual

2 Select SELECT > Navigate To > Route To.
3 Select the location of the last turn before the destination.
4 Select SELECT > Add Turn.
5 If necessary, repeat step 3 and 4 to add additional turns, working
backward from the destination to the present location of your vessel.
The last turn you add should be the first turn you make, starting from your
present location. It should be the turn closest to your vessel.
6 Select SELECT > Done.
7 Review the course indicated by the magenta line.
8 Follow the magenta line, steering to avoid land, shallow water, and other
obstacles.

Creating and Saving a Route

This procedure saves the route and all the waypoints in it. The starting point
can be your present location or another location.
1 Select NAV INFO > User Data > Routes & Auto Guidance > New >
Route Using Chart.
2 Select the starting location of the route.
3 Select SELECT > Add Turn.
4 Select the location of the next turn on the chart.
5 Select SELECT > Add Turn.
The AQUAMAP marks the location of the turn with a waypoint.
6 If necessary, repeat steps 4 and 5 to add more turns.
7 Select SELECT > Done.

Viewing a List of Routes and Auto Guidance Paths

1 Select NAV INFO > User Data > Routes & Auto Guidance.
2 If necessary, select Filter to see routes only or Auto Guidance paths only.
AQUAMAP™ 10x2/12x2 SERIES

Editing a Saved Route

You can change the name of a route or change the turns the route contains.
1 Select NAV INFO > User Data > Routes & Auto Guidance.
2 Select a route.
3 Select Review > Edit Route.
4 Select an option:
• To change the name, select Name, and enter the name.
• To select a waypoint from the turn list, select Edit Turns > Use Turn
List, and select a waypoint from the list.
• To select a turn using the chart, select Edit Turns > Use Chart, and
select a location on the chart.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of them, you must
create and save at least one route.
1 Select NAV INFO > User Data > Routes & Auto Guidance.
2 Select a route.
3 Select Navigate To.
4 Select an option:
• To navigate the route from the starting point used when the route was
created, select Forward.
• To navigate the route from the destination point used when the route
was created, select Backward.
A magenta line appears. In the center of the magenta line is a thinner
purple line that represents the corrected course from your present location
to the destination. The corrected course is dynamic, and it moves with
your boat when you are off course.
5 Review the course indicated by the magenta line.
25