Vrm And Ebl; Professional Mode; Radar Overlay; Radar Overlay And Chart Data Alignment - Garmin AQUAMAP 10x2 Series Owner's Manual

Display Speed, and select a speed.
• To show details about AIS-activated vessels, set Details to Show.
• To set the projected heading time for AIS-activated vessels, select Proj.
Heading, and enter the time.
• To show outlines of vessels, set Vessel Outline to Show.

VRM and EBL

The variable range marker (VRM) and the electronic bearing line (EBL)
measure the distance and bearing from your boat to a target object. On
the Radar screen, the VRM appears as a circle that is centered on the
present location of your boat, and the EBL appears as a line that begins
at the present location of your boat and intersects the VRM. The point of
intersection is the target of the VRM and the EBL.
Showing the VRM and the EBL
From a radar screen, select MENU > Radar Options > Show VRM/EBL.
Adjusting the VRM and the EBL
Before you can adjust the VRM and the EBL, you must show them on the
Radar screen.
You can adjust the diameter of the VRM and the angle of the EBL, which
moves the intersection point of the VRM and the EBL. The VRM and the EBL
configured for one mode are applied to all other radar modes.
1 From a radar screen, use the knob to adjust the VRM.
2 Use the arrow keys to adjust the cursor.
3 Select SELECT > Drop VRM/EBL to set the VRM and EML.
Measuring the Range and Bearing to a Target Object
1 From a radar screen, select the target location.
2 Select Measure Distance.
58
The range and the bearing to the target location appear in the upper-left
corner of the screen.

Professional Mode

Professional mode provides additional advanced data on the screen and
allows you to track two MARPA targets and two AIS targets simultaneously on
the lower right corner of the screen.
1 From a radar screen, select MENU > Edit Overlays.
2 Select Prof. Mode > On.

Radar Overlay

When you connect your AQUAMAP to an optional Garmin marine radar, you
can use overlay radar information on the Nav. chart or on the Fishing chart.
Data appears on the radar overlay based on the most recently used radar
mode and all settings configurations applied to the radar overlay are also
applied to the last-used radar mode.

Radar Overlay and Chart Data Alignment

When using the Radar overlay, the AQUAMAP aligns radar data with chart
data based on the boat heading, which is based by default on data from a
magnetic heading sensor connected using a NMEA 0183 or NMEA 2000
AQUAMAP™ 10x2/12x2 SERIES