Gps Satellite Signals; Selecting The Gps Source; Customizing Aquamap; Home Screen - Garmin AQUAMAP 10x2 Series Owner's Manual

NOTE: If the memory card is removed before the device restarts fully, the
software update is not complete.

GPS Satellite Signals

When you turn on AQUAMAP, the GPS receiver must collect satellite data
and establish the current location.
When AQUAMAP acquires satellite signals,
Home screen. When AQUAMAP loses satellite signals,
a flashing question mark appears over on the chart.
For more information about GPS, go to Garmin.com/aboutGPS.

Selecting the GPS Source

You can select your preferred source for GPS data, if you have more than
one GPS source.
1 Select Settings > System > GPS > Source.
2 Select the source for GPS data.
4
appears at the top of the
disappears and

Customizing AQUAMAP

Home Screen

The home screen provides access to all of the features in the device. The
features are dependent on the accessories you have connected to the device.
When viewing another screen, you can return to the home screen by pressing
HOME. You can customize the layout of the screens and the items shown on
the home screen.
Item
Favorites Shortcuts such as chart, combination screen, or gauge.
Combos Combination screens for simultaneous views.
Charts Chart views such as navigation, fishing, or forecast.
Sonar Sonar views such as ClearVü, SideVü, or LiveVü.
Radar Radar views such as Single Range or Dual Overlay.
Functions such as wind monitor, media playback, or control
A/V, Gauges, Controls
switches.
Settings System settings and preferences.
Description
AQUAMAP™ 10x2/12x2 SERIES