Sidevü Scanning Technology; Measuring Distance On The Sonar Screen; Panoptix Sonar Views; Livevü Down Sonar View - Garmin AQUAMAP 10x2 Series Owner's Manual

The transducer on your vessel
3
Trees
4
Old tires
5
Logs
6
Distance from the side of the boat
7
Water between the vessel and the bottom
8
SideVü Scanning Technology
Instead of a more common conical beam, the SideVü transducer uses a flat
beam to scan the water and bottom to the sides of your boat.

Measuring Distance on the Sonar Screen

You can measure the distance between two points on the SideVü sonar view.
1 From the SideVü sonar view, select a location on the screen.
2 Select Measure Distance.
A push pin appears on the screen at the selected location.
3 Select another location.
The distance and angle from the pin is listed in the upper-left corner.
38
TIP: To reset the pin and measure from the current location of the pin, select
Measure Distance.

Panoptix Sonar Views

NOTE: Not all models support Panoptix transducers.
To receive Panoptix sonar, you need a compatible AQUAMAP and a
compatible transducer.
The Panoptix sonar views allow you to see all around the boat in real time.
You can also watch your bait underwater and bait schools in front of or below
your boat.
The LiveVü sonar views provide you a view of the live movement either in
front of or below your boat. The screen updates very quickly, producing sonar
views that look more like live video.
The RealVü 3D sonar views provide three-dimensional views of either what
is in front of or below your boat. The screen updates with each sweep of the
transducer.
To see all five Panoptix sonar views, you need one transducer to show the
down views and a second transducer to show the forward views.
LiveVü Down Sonar View
This sonar view shows a two-dimensional view of what is below the boat and
can be used to see a bait ball and fish.
AQUAMAP™ 10x2/12x2 SERIES