Tracks; Recording Tracks; Managing The Track Log Memory During Recording; Configuring The Recording Interval Of The Track Log - Garmin AQUAMAP 10x2 Series Owner's Manual

Tracks

A track is a recording of the path of your boat. The track currently being
recorded is called the active track, and it can be saved. You can show tracks
in each chart or 3D chart view.

Recording Tracks

From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Tracks > On.
A trailing line on the chart indicates your track.

Managing the Track Log Memory During Recording

1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Active Tracks > Active Track Options > Record Mode.
NOTE: The Tracks menu can also be accessed from any screen by
selecting NAV INFO > User Data > Tracks.
2 Select an option:
• To record a track log until the track memory is full, select Fill.
• To continuously record a track log, replacing the oldest track data with
new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is recorded. Recording
more frequent plots is more accurate but fills the track log faster. The
resolution interval is recommended for the most efficient use of memory.
1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Active Tracks > Active Track Options.
2 Select an option:
• To record the track based on a distance between points, select
Distance > Change, and enter the distance.
• To record the track based on a time interval, select Time > Change,
AQUAMAP™ 10x2/12x2 SERIES
and enter the time interval.
• To record the track plot based on a variance from your course, select
Resolution > Change, and enter the maximum error allowed from the
true course before recording a track point. This is the recommended
recording option.

Setting the Color of the Active Track

1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Active Tracks > Active Track Options > Track Color.
2 Select a track color.

Saving the Active Track

The track currently being recorded is called the active track.
1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Active Tracks > Save Active Track.
2 Select an option:
• Select the time the active track began.
• Select Entire Log.
3 Select Save.

Clearing the Active Track

From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Active Tracks > Clear Active Track.
The track memory is cleared, and the active track continues to be
recorded.

Retracing the Active Track

The track currently being recorded is called the active track.
1 From a chart or a 3D chart view, select MENU > Marks, Wpts & Tracks >
Active Tracks > Follow Active Track.
23