Configuring Advanced Data Fields - Garmin FishFinder 340C Owner's Manual

Configuring Advanced Data Fields
The top-left corner of the screen contains configurable data fields
for the Sonar Pages. You can display basic or advanced data for
these data fields. By default, the Basic configuration shows the
depth, water temperature, and speed (depending on the Graph
tab settings and the type of transducer or sensors attached). The
Advanced configuration shows a larger, configurable data field with
a white background. The Advanced Data Setup Menu allows you to
specify the type of data displayed and either a Narrow (small) or
Wide (larger) size format for each data field.
Fishfinder 340C Owner's Manual
U F 340C >
SING THE ISHFINDER
The following selections require the proper NMEA data to display
information in a data field: Bearing, Compass, Course, Distance to
Next, Off Course, Pointer, Position, Speed, Time Of Day, Track,
Turn, and VMG. You must turn on NMEA Input/Output to receive
this data (see page 41).
To toggle the data field display:
Press and release the DATA/CNFG key to alternate
between the Basic and Advanced data field configurations.
To change or add an advanced data field:
1. Press and hold the DATA/CNFG key to access the
Advanced Data Menu. The current configuration appears on
the left side of the screen. The available data field options
appear on the right side.
2. Use the Rocker to select the Wide or Narrow tab.
3. Press down on the Rocker to select the slider. Then press
left or right to determine the quantity of fields of that size.
4. Press down on the Rocker to select a field that you want to
change. Press ENTER to see your choices. Press ENTER
again to select your choice. Your choice appears as a
new data field. Repeat this step for each field you want to
change.
5. When you are finished, press QUIT to exit the Advanced
Data Menu. Your new choices appear on the screen.
C A D F
ONFIGURING DVANCED ATA IELDS
39