Turning On And Off The Remote Backlight; Disconnecting The Remote From All Aquamaps; Using The Garmin Helm Application With The Aquamap; Connecting A Quatix ® Watch To The Aquamap - Garmin AQUAMAP 10x2 Series Owner's Manual

Turning On and Off the Remote Backlight

Turning off the remote backlight can significantly increase the battery life.
1 On the AQUAMAP, select Settings > Communications > Wireless
Devices > Wireless Remote > Backlight.
2 Follow the on-screen instructions.

Disconnecting the Remote from All AQUAMAPs

1 On the AQUAMAP, select Settings > Communications > Wireless
Devices > Wireless Remote > Disconnect All.
2 Follow the on-screen instructions.
Using the Garmin Helm Application with the
AQUAMAP
Before you can control the AQUAMAP with the Garmin Helm application, you
must download and install the application, and connect the AQUAMAP to a
Wi-Fi router.
1 Select Settings > Communications > Wireless Devices > Helm App.
2 Select an option.
3 Use the application to view or control the AQUAMAP.
Connecting a quatix Watch to the AQUAMAP
®
You can connect a compatible quatix watch, such as the quatix 3 watch, to
a compatible AQUAMAP to view data from the AQUAMAP on your quatix
watch.
1 Bring the quatix watch within range (3 m) of the AQUAMAP.
2 From the quatix watch clock screen, select START > Boat Data > START.
NOTE: If you have already connected to the AQUAMAP, and would like
to connect to a different AQUAMAP, open the Boat Data screen, hold UP,
and select Pair new.
86
3 On the AQUAMAP, select Settings > Communications > Wireless
Devices > Garmin Wearable > Enable Connections > New
Connection.
The AQUAMAP begins searching for and connecting to the wearable
device.
After the devices are paired, they connect automatically when they are turned
on and within range.
Connecting a Garmin Nautix™ Device to the
AQUAMAP
Pairing is the initial connection of two compatible wireless devices. For
example, the first time you connect a Garmin Nautix device to a compatible
AQUAMAP you are pairing the devices. For a list of compatible devices, go to
the product page at Garmin.com.
NOTE: You can pair a Garmin Nautix device to multiple compatible devices
for better coverage on larger vessels.
1 Bring the a Garmin Nautix device within range (3 m) of the AQUAMAP.
The device automatically looks for all compatible devices within range.
2 If necessary, from the wearable device menu, select Device Connections
> Pair New Device.
3 On the AQUAMAP, select Settings > Communications > Wireless
Devices > Garmin Wearable > Enable Connections > New
Connection.
The AQUAMAP begins searching for and connecting to the wearable
device.
After the devices are paired, they connect automatically when they are turned
on and within range.
AQUAMAP™ 10x2/12x2 SERIES