Ricoh B082 Service Manual page 933

Rev. 09/2003
⇒
FAX Switch 0E
No FUNCTION
0 Not used
1 Scan resolution unit
0: mm
1: inches
2-7 Not used
FAX Switch 10 ~ 1F - Not used (do not change the settings)
⇒
FAX Switch 0F
No FUNCTION
0 Image rotation before
transmission (A4/LT sideways)
0: Disabled
1: Enabled
1 Not used
2 Image rotation before
transmission (A5/HLT
lengthwise)
0: Disabled
1: Enabled
3-7 Not used
SM
COMMENTS
Do not change the settings.
This bit determines which resolution unit will be
used for scanning a fax message.
Default setting: mm
Do not change the settings.
COMMENTS
This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at 1, A4 (LT) sideways images (297
mm width in the protocol) will be transmitted as A4
(LT) lengthwise images (216 mm width in the
protocol).
Do not change the setting.
This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at "1", A5 (HLT) lengthwise images
will be transmitted as A4 (LT) width images (216
mm width in the protocol).
Do not change the settings.
55
BIT SWITCHES
SP No. 3-201-015
SP No. 3-201-016
B547