Ricoh B082 Service Manual page 766

BIT SWITCHES
Printer Switch 03
No FUNCTION
4 Page separation threshold (with reduction disabled with switch 03-0 above)
to
7 If the incoming page is up to x mm longer than the length of copy paper, the excess
portion will not be printed. If the incoming page is more than x mm longer than the
length of copy paper, the excess portion will be printed on the next page.
The value of x is determined by these four bits.
Hex value of bits 4 to 7 x (mm)
and so on until
Default setting: 6 mm
Cross reference
Length reduction On/Off: Printer Switch 03, Bit 0
Printer Switch 04
No FUNCTION
0 Maximum reducible length when length reduction is enabled with switch 03-0 above.
to <Maximum reducible length> = <Paper length> + (N x 5mm)
4 "N" is the decimal value of the binary setting of bits 0 to 4.
Bit 4 3 2 1 0 Setting
0 0 0 0 0 0 mm
0 0 0 0 1 5 mm
0 0 1 0 0 20 mm (default setting)
1 1 1 1 1 155 mm
For A5 sideways and B5 sideways paper
<Maximum reducible length> = <Paper length> + 0.75 x (N x 5mm)
5 Length of the duplicated image on the next page, when page separation has taken
to place.
6
  
0 1
   
=
4 mm,
0 0
  
7 Not used.
Printer Switch 05 - Not used (do not change the settings)
B547
0 0
1 1
F 15
  
0
 
= =
10 mm, 15 mm,
1
  
Do not change the setting.
COMMENTS
COMMENTS
 
1
 
=
Not used
1
 
58
SP No. 1-103-004
SP No. 1-103-005
SM