Ricoh B082 Service Manual page 50

PAPER TRAY UNIT INSTALLATION (B542)
[F]
[E]
[A]
B542I113.WMF
4. Remove the middle front cover [A] and pull out the front handles [B].
5. Using the front handles and rear handles, lift the machine and hold it over the
paper tray unit [C].
6. Slowly lower the machine onto the paper tray unit with the pegs [D] aligned with
the peg holes on the bottom of the machine.
NOTE: Do not hold the scanner unit.
7. Re-install the middle front cover [A].
8. Attach the spring washer [E] to the short knob screw [F]. Then, secure the
paper tray unit.
9. Open the right cover of the paper tray unit [G].
10. Secure the joint bracket [H] (1 long knob screw).
11. Remove the connector cover [I] of the main machine ( x 1).
12. Connect the paper tray unit harness [J] to the main machine and reinstall the
connector cover.
B079/B082
[B]
[D]
[C]
[H]
[G]
B542I517.WMF
1-20
[J]
[I]
SM