Ricoh B082 Service Manual page 657

1.2.2 PRINTER CONTROLLER INSTALLATION

CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove the controller board. (!1.2.1)
2. Install the printer ROM DIMM [A] in the inside slot of the controller board.
3. Install the NIB packed with the printer/scanner option. (!1.5)
If one or more of the following options are to be installed, you must remove the
HDD and install them before proceeding to the next step:
• Postscript Kit (G354-17)
• 128 Memory Card (G331)
• IEEE 1394 Interface (G336)
• USB 2.0 (B525-01)
• IEEE 802.11b Wireless LAN (B515)
• Bluetooth (G354-04)
SM
[A]
3
PRINTER INSTALLATION PROCEDURE
B548I110.WMF
B548