The Port Edit Screen - ZyXEL Communications GS1900-8 User Manual

Figure 177 Configurat ion > Securit y > 802.1X > Port
The following t able describes t he labels in t his screen.
Table 143 Configurat ion > Securit y > 802.1X > Port
LABEL
Port
Edit
Port
St at e
Reaut hent icat ion
Reaut hent icat ion
Period
Quiet Period
Supplicant Tim e
out
Max EAP
Request s
Apply
Cancel

29.4.3 The Port Edit Screen

Use t his screen t o configure t he Por t set t ings. Click Con figu r a t ion > Se cu r it y > 8 0 2 .1 X > Por t
> Edit t o open t his screen.
Chapter 29 Configuration: Security
DESCRIPTION
Select t his check box t o configure t he propert ies of a port . Click t he Edit but t on change
t he propert ies of t he port .
Displays t he port index value.
Displays t he Trust st at us as enabled or disabled.
Displays if Reaut hent icat ion funct ion is enabled. I f enabled, t he subscriber has t o
periodically re- ent er his or her usernam e and password t o st ay connect ed t o t he port .
Displays t he Reaut hent icat ion period for t he funct ion: t he period of t im e ft en a client has
t o re- ent er his or her usernam e and password t o st ay connect ed t o t he port .
Display t he t im e out period t o t ransm it request aft er receiving a rej ect ion from t he sever.
Display t he t im e out period t o t ransm it a request when t he client does not responsed.
Ent er t he m axim um num ber of request ret ries.
Click Apply t o save t he changes.
Click Ca n ce l t o discard t he changes.
GS1900 Series User's Guide
186