The Lag Port Screen - ZyXEL Communications GS1900-8 User Manual

The following t able describes t he labels in t his screen.
Table 91 Configurat ion > Link Aggregat ion > LAG Managem ent > Add
LABEL
LAG Managem ent
LAG
Nam e
Type
Mem ber Port s
Apply
Cancel

22.2.4 The LAG Port Screen

Use t his screen t o view LAG port set t ings. Click Con figu r a t ion > Lin k Aggr e ga t ion > LAG Por t
t o open t his screen.
Figure 126 Configurat ion > Link Aggregat ion > LAG Port
The following t able describes t he labels in t his screen.
Table 92 Configurat ion > Link Aggregat ion > LAG Port
LABEL
LAG Port
Edit
LAG
Nam e
Port Type
St at e
Speed
Duplex
FlowCt rl St at e
FlowCt rl St at us
Chapter 22 Configuration: Link Aggregation
DESCRIPTION
Select t he link aggregat ion group ( LAG) .
Ent er t he nam e of t his ent ry.
Select St a t ic or LACP.
Select t he m em ber port s t o be part of t he LAG.
Click Apply t o save t he changes.
Click Ca nce l t o discard t he changes.
DESCRIPTION
Select t his check box t o configure t he propert ies of a port . Click t he Edit but t on change t he
propert ies of t he port .
Displays t he LAG index value.
Displays t he LAG nam e.
Displays t he port t ype.
Displays t he st at e as En a ble / D isa ble .
Displays t he speed value as Au t o, Au t o- 1 0 M , Au t o- 1 0 0 M , Aut o- 1 0 0 0 M , Au t o- 1 0 /
1 0 0 M , 1 0 M , 1 0 0 M , or 1 0 0 0 M .
Displays t he duplex value as Fu ll, H a lf, or Au t o.
Displays whet her flow cont rol is En a ble / D isa ble .
Displays whet her flow cont rol is in use ( En a ble ) or not ( D isa ble ) .
GS1900 Series User's Guide
132