The Loop Guard Port - ZyXEL Communications GS1900-8 User Manual

Table 96 Configurat ion > Loop Guard ( cont inued)
LABEL
Recovery Tim e
Apply
Cancel

23.2.2 The Loop Guard Port

Use t his screen t o view t he Loop Guard Port . Click Configur a t ion > Loop Gua r d > Por t t o open
t his screen.
Figure 131 Configurat ion > Loop Guard > Port
The following t able describes t he labels in t his screen.
Table 97 Configurat ion > Loop Guard > Port
LABEL
Port
Edit
Port
St at e
Act ion
23.2.3 The Port Edit Screen
Use t his screen t o configure a Loop Guard port . Click Configur a t ion > Loop Gua r d > Por t > Edit
t o open t his screen.
Chapter 23 Configuration: Loop Guard
DESCRIPTION
Ent er t he period ( in seconds) for which a port will be kept disabled in t he event of a loop is
det ect ed ( and t he port act ion shut s down t he port ) .
Click Apply t o save t he changes.
Click Ca nce l t o discard t he changes.
DESCRIPTION
Click Edit t o change t he propert ies of t he port .
Displays t he port index num ber.
Displays whet her t he port st at e is En a ble or D isa ble .
Displays t he act ion t o t ake by t he Swit ch. The opt ions are Log, Sh u t dow n Por t , and
Sh u t dow n and Log.
GS1900 Series User's Guide
137