Setting The Time And Date - Fluke CableIQ User Manual

CableIQ Qualification Tester
Users Manual

Setting the Time and Date

The time and date are stored with saved Autotests. The
time setting uses a 24-hour clock.
To set the time and date:
1 Turn the rotary switch to SETUP.
D
2 Press to highlight Time / Date; then press
J .
3 To select a field to edit, use
H
field; then press or
A D
4 Use to change the setting in the selected
H
field; then press .
12
H
B C
to highlight the
J .
Entering User Information
The User Information screen lets you enter three lines of
text that are stored with saved Autotest results. For
example, you could enter the operator's name and your
company's name and location.
To enter user information:
or
1 Turn the rotary switch to SETUP.
D
2 Use to highlight User Information; then press
or .
J
AD
3 Use
or .
J
B CAD
4 Use
described in Figure 4.
H
5 Press to save changes in the selected box.
6 Repeat steps 3 through 5 to edit text in other boxes.
to highlight a box to edit; then press
and the softkeys to edit the text, as
H
H